PS2100 surface mount schottky rectifier reverse voltage 100v forward current 2a features ? heatsink structure ? low profile, typical thickness 0.8mm ? super low vf schottky barrier diodes ? moisture sensitivity: level 1, per j-std-020 ? high temperature soldering guaranteed: 260 /10 seconds typical applications for use of fast swiching in rf module, lighting, cellular phone, portable device, power supplies and other consumer applications. vrrm v vrms v vdc v if(av) a ifsm a i 2 t a 2 sec t j c t stg c minimum breakdown voltage ta=25 ,ir=1ma v br if=2a,ta=25 v f if=2a,ta=125 v f ta=25 ua ta=125 ua typical junction capacitance 4.0 v, 1 mhz c j pf typical thermal resistance juntion to ambient r ja 1) juntion to lead r jl 1) juntion to case r jc 2) note:1),the thermal resistance from junction to ambient or lead, mounted on p.c.b with 55mm copper pads,2 oz,fr4 pcb 2),the thermal resistance from junction to case, mounted on p.c.b with recommended copper pads,2 oz,fr4 pcb instantaneous forward voltage instantaneous reverse current at rated dc blocking voltage i r 0.39 181 5 500 0.77 0.62 0.80 0.65 60 65 /w 9 35 electrical characteristics (ta = 25 c unless otherwise noted) parameter test conditions symbol unit typ. max. 50 operating junction temperature range - 55 to + 150 storage temperature range - 55 to + 150 rating for fusing(t 8.3ms) 10 100 maximum ratings (ta = 25 c unless otherwise noted) parameter symbol unit maximum repetitive peak reverse voltage 100 maximum rms voltage PS2100 maximum dc blocking voltage maximum average forward rectified current 2.0 70 100 volts peak forward surge current 8.3 ms single half sine- wave superimposed on rated load isga (sod - 123hs) www.goodark.com 1/4 2016.05-rev.a
PS2100 surface mount schottky rectifier reverse voltage 100v forward current 2a ratings and characteristics curves (ta = 25 unless otherwise noted) figure 3. typical instantaneous forward characteristics figure 4. typical reverse characteristics figure 1.forward current derating curve figure 2.maximum non - repetitive peak forward surge current figure 5. typical junction capacitance 0 10 20 30 40 50 60 1 10 100 peak forward surge current a number of cycles at 60hz ta=25 8.3ms single half sine - wave 0 0.5 1 1.5 2 2.5 50 70 90 110 130 150 average forward rectified current, a lead temperature 1 10 100 1000 10000 0.1 1 10 junction capacitance (pf) reverse voltage (v) tj=25 f=1.0mhz vsig=50m vp - p 0.001 0.01 0.1 1 10 100 0 0.4 0.8 1.2 1.6 instantaneous forward current (a) instantaneous forward voltage (v) 25 75 100 125 150 0.1 1 10 100 1000 10000 100000 0 20 40 60 80 100 instantaneous reverse current (ua) instantaneous reverse voltage (v) 25 75 100 125 150 www.goodark.com 2/4 2016.05-rev.a
PS2100 surface mount schottky rectifier reverse voltage 100v forward current 2a package outline dimensions packing information packing quantities: tape & reel specification soldering footprint www.goodark.com 3/4 2016.05-rev.a package unit:mm min max a 0.75 0.90 b 0.85 1.05 b1 0.85 1.05 c 0.1 0.25 d 1.9 2.1 e 2.9 3.1 l1 2.0 2.45 l2 0.4 0.85 l3 1.3 1.7 he 3.5 3.9 isga reel size quantity/reel quantity/inner box quantity/carton 7" 3k 30k 120k
PS2100 surface mount schottky rectifier reverse voltage 100v forward current 2a disclaimers these materials are intended as a reference to assist our customers in the selection of the suzhou good-ark product best suited to the customer s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to suzhou good-ark electronics co., ltd.or a third party. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, or infringement of any third-party s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. all information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by suzhou good-ark electronics co., ltd. without notice due to product improvements or other reasons. it is therefore recommended that customers contact suzhou good-ark electronics co., ltd. or an authorized suzhou good-ark electronics co., ltd. for the latest product information before purchasing a product listed herein. the information described here may contain technical inaccuracies or typographical errors. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. please also pay attention to information published by suzhou good- ark electronics co., ltd. by various means, including our website home page. (http://www.goodark.com) when using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. the prior written approval of suzhou good-ark electronics co., ltd. is necessary to reprint or reproduce in whole or in part these materials. please contact suzhou good-ark electronics co., ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2016.05-rev.a
|
